Skip to main content

Specialty Clinic Playbooks

Setting Up an Orthopaedic Clinic: X-Ray, Plaster Room and Flow

How to set up an orthopaedic clinic in India: consultation and examination, X-ray with AERB approval, plaster room, physio tie-up, implant pricing and patient flow.

Bractis clinic guides · Updated · 4 min read

Short answer

An orthopaedic clinic in India usually needs a consultation and examination room with space for patients on crutches or wheelchairs, an X-ray unit with AERB approval or a tie-up with a nearby imaging centre, a plaster and dressing room, splints and orthotic supplies, and a link to physiotherapy. Choose a ground floor with ramp access. Surgeries are usually done at a hospital or day-care centre, where implant prices should be explained clearly, including any government ceiling prices. Plan the flow so X-rays and plasters do not hold up consultations.

What an orthopaedic clinic needs

Orthopaedic patients arrive in pain, on crutches, in wheelchairs, or carried by family. Many need an X-ray before the doctor can decide, and many leave with a plaster, splint or brace. The clinic's layout, access and imaging decide how smoothly the day runs.

This guide is general information. Check state clinic registration and AERB requirements before installing X-ray equipment.

Space and access

On a narrow screen, scroll the table sideways to see every column.

AreaNotes
EntranceGround floor, ramp, wide door, wheelchair available
Waiting areaChairs with arms for elderly patients, space for wheelchairs
Consultation and examination roomExamination couch at a good height, space to walk and test gait
X-ray roomShielded as AERB requires, with a control area
Plaster and dressing roomSink, plaster table, storage for casting materials and splints
Procedure room (optional)For joint injections, minor procedures
StorageBraces, splints, crutches, collars
ToiletAccessible, with grab rails

A small orthopaedic clinic can work in 700 to 1,200 square feet if X-ray is included.

Equipment list

  • Examination couch, goniometer, tendon hammer, measuring tape.
  • X-ray unit with digital or computed radiography, if in-house.
  • Viewing screen or workstation for X-rays and MRI images.
  • Plaster table, plaster cutter, casting materials, padding.
  • Splints, slings, collars, braces in common sizes.
  • Dressing trolley and sterile supplies.
  • Injection supplies and an emergency tray.
  • Wheelchair and crutches for patient movement.
  • Autoclave and sterilisation records.

X-ray

An in-house X-ray saves patients a trip and speeds decisions, but needs AERB registration or licence, a properly shielded room, a qualified radiographer, a radiation safety officer and dosimetry for staff. See AERB registration for X-ray in a clinic. If volumes are low at the start, tie up with a nearby imaging centre with fast reporting, and add in-house X-ray later.

Plaster and dressing room

Train a plaster technician or nurse to apply casts and splints under your supervision. Give patients written instructions on cast care, warning signs such as increasing pain, numbness or colour change, and when to return. Keep records of casts applied and removal dates.

Surgery and implants

Most orthopaedic surgeons operate at a hospital or day-care centre. When counselling patients:

  • Explain the procedure, implant options and expected recovery.
  • Give a written estimate, with the implant price shown separately.
  • Mention that knee implants are under government price control, so patients can check prices.
  • Explain what insurance or schemes cover.

Never steer patients to particular implant brands because of incentives.

Patient flow

  1. Registration, with a wheelchair if needed.
  2. Brief history and examination.
  3. X-ray, while the doctor sees the next patient.
  4. Review of X-ray and decision.
  5. Plaster, injection or procedure in the side room.
  6. Physiotherapy referral, prescriptions and follow-up date.

Keep plaster and X-ray running in parallel with consultations.

Registration

  • Clinical establishment registration under state law.
  • AERB approval for X-ray.
  • Biomedical waste authorisation.
  • Trade licence and other local approvals.
  • GST registration if you sell braces or supports above the threshold.

Communication

NMC's 2026 guidelines bar testimonials, before-and-after videos and claims such as "painless knee replacement". Educate in your own name on topics like osteoporosis, back pain and fall prevention.

Fracture follow-up

Fractures need regular checks: X-rays at set intervals, cast changes and removal, and a plan for rehabilitation. Set the next date at each visit, give patients a written schedule and call those who miss a check. A missed follow-up can mean a fracture healing in the wrong position or a stiff joint that needs more treatment later.

Injections and procedures

Joint and soft tissue injections are common in orthopaedic clinics. Keep a clean procedure area, use aseptic technique, take and record consent, note the drug, dose, batch and site, and observe patients briefly afterwards. Keep an emergency tray ready for reactions.

A worked example

An orthopaedic surgeon in Lucknow opened a clinic on the first floor to save rent. Elderly patients and those on crutches struggled with the stairs, and many sent relatives instead. He moved to a ground-floor space with a ramp, tied up with an imaging centre next door for same-day X-rays, and trained a nurse in plaster work. Patient numbers grew, and after a year he installed his own digital X-ray with AERB approval.

Common mistakes

  • Upper-floor clinics without a lift.
  • Installing X-ray without AERB approval.
  • No written cast care instructions.
  • Implant pricing not explained.
  • Referral payments to physiotherapists or imaging centres.

Where Bractis fits

Bractis keeps notes, prescriptions, follow-up dates and payment status in one record, and lets patients choose how to receive records without forcing an app install. Ask the team what is supported today for attaching X-ray images and reports, and test it. Plans start at ₹999 a month plus GST.

Frequently asked questions

What equipment does an orthopaedic clinic need?

An examination couch, X-ray or a tie-up with an imaging centre, a plaster table and casting materials, splints and braces, a dressing trolley and an autoclave.

Does an ortho clinic need AERB approval?

Yes, if it installs X-ray equipment. Registration or licence through AERB's eLORA system is required before use.

Should an orthopaedic clinic be on the ground floor?

Ideally yes, with ramp access, because many patients have difficulty walking or use wheelchairs.

How should implant prices be explained?

Give a written estimate with the implant price shown separately, explain options, and mention any government price ceilings.

Run this in your own clinic

Bractis is clinic management software built for Indian OPDs: appointments, patient records, prescriptions, billing and follow-up in one place. You can try it in your own clinic before you decide.

Sources and review

Written by the Bractis editorial team for doctors and clinic owners in India. Rules, fees and prices change: check the linked primary sources before acting, and ask your CA or lawyer about your own case.

Starting a Sports Injury Clinic

How to start a sports injury and rehabilitation clinic in India: team, space, equipment, return-to-play protocols, partnerships and anti-doping care.

Setting Up a Day-Care Procedure Centre

How doctors in India can set up a day-care procedure centre: registration, operation theatre standards, anaesthesia, recovery, emergency transfer, insurance and NABH.