Skip to main content

Opening a Clinic in India

AERB Licence for an X-Ray Unit in Your Clinic

How a clinic gets AERB approval for an X-ray, dental X-ray or CT unit: type-approved equipment, room layout, radiation safety officer, eLORA steps, QA tests and renewal.

Bractis clinic guides · Updated · 4 min read

Short answer

Before a clinic operates any medical X-ray equipment, including dental intraoral units, OPG, radiography, C-arm or CT, it must obtain regulatory consent from the Atomic Energy Regulatory Board through its online eLORA system. You buy only a type-approved model from an authorised supplier, get the room layout approved, nominate a qualified radiological safety officer, have the supplier install and quality-test the unit, and then apply for registration or a licence depending on the equipment. Consent must be renewed and quality assurance tests repeated on schedule.

Why AERB approval is needed

X-rays are ionising radiation. Badly installed or poorly shielded units can expose staff, patients and neighbours to needless dose over years. The Atomic Energy Regulatory Board regulates all medical X-ray equipment under the Atomic Energy Act and the Radiation Protection Rules. Using a unit without consent is an offence, and AERB can order it sealed. Equipment suppliers will not hand over a unit for use until the facility has registered on AERB's system.

What equipment is covered

All medical diagnostic X-ray equipment is covered, including:

  • Dental intraoral X-ray units and OPG or CBCT machines.
  • Fixed and mobile radiography units, including computed and digital radiography.
  • Fluoroscopy and C-arm units.
  • Mammography units.
  • Bone densitometry.
  • CT scanners and interventional radiology equipment.

AERB grades the type of consent by the risk of the equipment. Higher-risk equipment such as CT and interventional radiology needs a licence, while many others need registration. Check AERB's current classification for your unit.

Step by step through eLORA

  1. Register the institution. Create an account for your clinic on AERB's eLORA (e-Licensing of Radiation Applications) system with the clinic's details and the employer's details.
  2. Choose a type-approved model. AERB maintains a list of equipment with type approval. Buy only those models, from a supplier authorised for that model.
  3. Room layout. Submit or confirm the X-ray room layout showing dimensions, wall material and thickness, door shielding, the position of the unit and the control console, and what is on the other side of each wall. Dental intraoral units have simpler requirements than fixed radiography or CT rooms.
  4. Radiological safety officer. Nominate a qualified radiological safety officer (RSO) for the facility. For many diagnostic facilities, a radiologist or a trained doctor or dentist can be approved as RSO after the required course, while larger facilities often use a medical physicist.
  5. Procurement permission. For some equipment, permission to procure is needed before purchase.
  6. Installation and QA. The supplier installs the unit and carries out quality assurance tests, such as tube voltage, timer accuracy, beam alignment and radiation leakage. The results are uploaded.
  7. Apply for consent. Apply for registration or licence with the QA report, layout, RSO details and personnel monitoring arrangements.
  8. Consent issued. Once approved, you may operate the unit. Display the consent at the facility.

Personnel and safety

On a narrow screen, scroll the table sideways to see every column.

RequirementWhat it means for a clinic
Personnel monitoringRadiation workers wear dosimeter badges from an accredited service, read on schedule
Protective accessoriesLead aprons, thyroid collars, mobile shields as suited to the equipment
Warning signsRadiation symbol and warning light outside the X-ray room
Pregnant patientsAsk and record before exposure; avoid unnecessary exposure
RecordsWorkload register, QA records, dose records

Train staff to stand behind the console or shield, close the door during exposure, and never hold a patient during exposure unless unavoidable and protected.

Renewal and changes

Consents are issued for a fixed period and must be renewed on eLORA. QA testing must be repeated at the intervals AERB sets, and after any major repair. Inform AERB if you move the unit, change the room, change the RSO, or decommission or sell the unit. Old units must be disposed of through the proper route; do not sell them informally.

Budgeting and timelines

The cost is mainly in shielding the room, any lead-lined doors or glass, the dosimeter service and the QA tests. Plan the X-ray room before interior work starts, because changing walls later is expensive. For a dental intraoral unit the process can be quick; for CT, expect longer reviews and a more detailed layout.

A worked example: a dental clinic adds an OPG

Dr Kiran runs a three-chair dental clinic with an intraoral X-ray unit already registered. She plans to add an OPG machine. She first checks that the model she likes is on AERB's type-approved list and that the dealer is authorised to install it. She then picks a room of the size the supplier's layout needs, away from the waiting area, and has the walls checked for thickness, adding lead lining to one wall that backs onto a neighbour's shop. On eLORA she adds the new equipment under her existing institution, uploads the layout, and confirms herself as RSO, as she already holds the required certification. The dealer installs the unit and completes QA tests, and she applies for registration with the QA report. Her two assistants get dosimeter badges from an accredited service. Within a few weeks the registration is granted and she begins OPG scans, displaying the certificate and warning signs outside the room.

Common mistakes

  • Buying a second-hand or imported unit without type approval.
  • Fitting the unit in a room shared with another purpose.
  • No dosimeter badges, or badges kept in a drawer instead of worn.
  • Letting the consent lapse, especially after the RSO leaves.
  • Moving a unit to a new branch without informing AERB.

Frequently asked questions

Does a dental X-ray machine need AERB registration?

Yes. Dental intraoral, OPG and CBCT units are medical X-ray equipment and need AERB consent through eLORA before use.

Who can be the radiological safety officer for a clinic?

It depends on the equipment. AERB sets the qualifications; for many diagnostic facilities a trained radiologist, doctor or dentist can be approved after the required course, while CT and larger facilities may need a medical physicist.

Can I buy a second-hand X-ray machine?

Only if the model is type-approved and the transfer is done through AERB's process. Informal purchases often cannot be registered.

How long does AERB approval take?

It varies by equipment and how complete your application is. Dental units are typically quicker than CT or fluoroscopy.

Run this in your own clinic

Bractis is clinic management software built for Indian OPDs: appointments, patient records, prescriptions, billing and follow-up in one place. You can try it in your own clinic before you decide.

Sources and review

Written by the Bractis editorial team for doctors and clinic owners in India. Rules, fees and prices change: check the linked primary sources before acting, and ask your CA or lawyer about your own case.