Skip to main content

Clinic Technology Beyond the EMR

Lab Machine Interfacing: Getting Results into Your Software

How clinic labs in India connect analysers to software: interfaces, HL7 and ASTM, barcodes, result checks, costs and what to test before going live.

Bractis clinic guides · Updated · 4 min read

Short answer

Lab machine interfacing connects analysers such as haematology, biochemistry and hormone machines to your lab or clinic software, so results flow in without retyping. A unidirectional interface sends results from the machine to the software; a bidirectional one also sends test orders to the machine using barcoded samples. Interfacing cuts transcription errors and saves time, but it needs the right protocol (often ASTM or HL7), correct test mapping, validation against manual results, and a doctor or technologist check before reports are released.

Why interfacing matters

In many clinic labs, a technician reads values off the analyser screen or printout and types them into the report software. Every typed value is a chance for error: a decimal in the wrong place, a result entered for the wrong patient, a unit mixed up. Interfacing sends results directly from the analyser to the software, so the number on the report is the number the machine measured. It also saves technician time that is better spent on quality control and sample handling.

This guide is general information. Laboratories seeking accreditation should follow NABL requirements for data integrity and reporting.

Unidirectional and bidirectional

On a narrow screen, scroll the table sideways to see every column.

TypeWhat it doesBest for
UnidirectionalMachine sends results to software; tests are selected on the machineSmall labs, low volume
BidirectionalSoftware sends orders to the machine; machine reads barcode, runs tests, returns resultsBusier labs, many tests per sample
MiddlewareA separate layer connects several machines and applies rulesLabs with many analysers

Bidirectional interfacing with barcoded sample tubes is the bigger safety gain, because the technician no longer selects tests or patient IDs on the machine. The barcode links the tube, the patient and the order.

Protocols in plain words

Analysers talk to software using standard protocols. Older and many current machines use ASTM, through a serial port or network. Newer systems may use HL7 messages. Some machines only export files to a folder, which the software picks up. Ask the analyser supplier which protocol and connection the exact model supports, and ask the software vendor whether they already have a working driver for that model in another lab.

Steps to set up an interface

  1. List every analyser with make, model, software version and connection port.
  2. Confirm the protocol and whether the supplier must enable the interface, sometimes for a fee.
  3. Map each test code on the machine to the test in your software, with units and reference ranges.
  4. Set up barcode labels and a printer if you are going bidirectional.
  5. Run a parallel period: enter results manually and by interface, and compare every value.
  6. Check flags, such as high, low and critical values, appear correctly.
  7. Train technicians on what to do when a result does not arrive.
  8. Go live only after the comparison is clean, and keep a record of the validation.

Checks before release

Interfacing does not remove the need for review. A pathologist or responsible technologist should still check results against quality control, look for implausible values and confirm critical results are communicated. Set up the software so results arrive as pending and are released only after review. Keep an audit trail of who released each report and any change made after release.

Downtime plan

Interfaces fail: a cable comes loose, a software update breaks the driver, the computer restarts. Keep a written manual fallback: print results from the machine, enter them with a second person checking, and mark those reports so they can be reconciled later. Know who to call at the analyser supplier and the software vendor, and keep their numbers on the wall.

Costs and contracts

Costs can include the analyser supplier enabling the port, the software vendor's interface driver, a computer near the analyser, cables or converters, barcode printers and labels, and annual support. Put in writing who is responsible when the interface fails after an analyser or software update. Reagent-rental agreements sometimes include interfacing; read the terms before signing.

Data protection

Lab results are sensitive personal data. Limit access by role, avoid shared logins, and send reports to patients and referring doctors through secure channels. Under the DPDP Act, the lab is responsible for this data even when the software is hosted by a vendor. Make sure test data used during validation is protected or deleted afterwards.

A worked example

A clinic with an in-house lab ran a haematology analyser and a semi-automatic biochemistry machine. Technicians typed about 120 results a day, and the clinic found two or three typing errors each month during report review. They set up a bidirectional interface for the haematology analyser with barcoded tubes and a unidirectional interface for biochemistry. During a two-week parallel run, they found one wrongly mapped unit for a test and corrected it before going live. Typing errors on interfaced tests stopped, and technicians had time for daily quality control charts.

Common mistakes

  • Going live without a parallel comparison.
  • Wrong units or reference ranges in the mapping.
  • Results released automatically without review.
  • No plan for interface downtime.
  • Not retesting after an analyser or software update.

Where Bractis fits

Bractis keeps reports with each visit and lets patients choose how they receive records without a forced app install. Roles limit who can see and change results. For direct analyser interfacing, ask the team what is supported today and test it with your machines.

Frequently asked questions

What is a bidirectional lab interface?

One where the software sends test orders to the analyser and the analyser sends results back, usually using barcoded samples.

Do all lab machines support interfacing?

Most modern analysers do, but some need the supplier to enable the feature, and older semi-automatic machines may not support it.

Is interfacing needed for NABL accreditation?

Not as such, but accreditation requires reliable data handling and reporting, which interfacing supports. Follow current NABL requirements.

Can results be released automatically?

Some labs use rules for automatic verification, but results should still be governed by review rules set by the responsible pathologist.

Run this in your own clinic

Bractis is clinic management software built for Indian OPDs: appointments, patient records, prescriptions, billing and follow-up in one place. You can try it in your own clinic before you decide.

Sources and review

Written by the Bractis editorial team for doctors and clinic owners in India. Rules, fees and prices change: check the linked primary sources before acting, and ask your CA or lawyer about your own case.