Skip to main content

Clinic Technology Beyond the EMR

Annual Maintenance Contracts for Clinic Equipment

How Indian clinics manage equipment maintenance: warranties, AMC and CMC contracts, what to include, response times, preventive maintenance, calibration and records.

Bractis clinic guides · Updated · 4 min read

Short answer

After warranty ends, clinics usually choose between an annual maintenance contract (AMC), which covers preventive visits and labour, and a comprehensive maintenance contract (CMC), which also covers parts. Choose based on the equipment's cost, age and importance. The contract should list equipment, preventive visit frequency, response and repair times, parts covered, calibration, standby units and exclusions. Keep a maintenance log for every device and check calibration as the maker recommends.

Why maintenance matters

A broken autoclave stops procedures. An uncalibrated BP monitor gives wrong readings. A failed ECG machine sends patients elsewhere. Equipment in Indian clinics also faces heat, dust, humidity and power fluctuations that shorten its life. Planned maintenance keeps equipment safe, accurate and working.

This guide is general information. Follow the manufacturer's instructions for each device.

Warranty, AMC and CMC

On a narrow screen, scroll the table sideways to see every column.

TypeCoversSuits
WarrantyRepairs and parts for defects, usually one to three yearsNew equipment
AMCPreventive visits and labour; parts chargedModerately priced, reliable equipment
CMCPreventive visits, labour and most partsCostly, critical equipment
Pay per callCharged per visit and partsSimple, cheap equipment

Many clinics use CMC for X-ray, ultrasound, dental chairs and analysers, and AMC or pay per call for smaller items.

What to include in a contract

  • List of equipment with model and serial numbers.
  • Number of preventive maintenance visits per year and what each includes.
  • Response time for breakdowns, such as within 24 or 48 hours.
  • Repair time, or a standby unit if repair takes longer.
  • Parts covered and excluded, such as consumables, glass or probes.
  • Calibration and safety checks, with certificates.
  • Software updates for computerised equipment.
  • Uptime commitment, for example 95 percent, with penalties.
  • Price, payment terms, GST and renewal.
  • Exit terms.

Ask whether the service provider is the manufacturer, an authorised dealer or a third party. Authorised service usually has genuine parts and trained engineers.

Preventive maintenance

Preventive visits catch problems early: cleaning, lubrication, filter changes, electrical safety checks, calibration and replacing worn parts. Keep the schedule in a calendar and record each visit.

Calibration

Devices that measure, such as BP monitors, glucometers, weighing scales, thermometers, ECG machines and lab analysers, need regular calibration or checks against standards. Follow the manufacturer's schedule and keep certificates. See calibrating glucometers and BP apparatus.

Daily care

Staff can do simple daily checks: cleaning, checking cables, running self-tests and noting errors. Train them and use a simple checklist for each device.

Records

Keep a log for each device:

On a narrow screen, scroll the table sideways to see every column.

FieldExample
Device and serial numberECG machine, SN 12345
Purchase date and warranty endDates
Contract type and providerCMC with authorised dealer
Preventive visitsDates and findings
BreakdownsDate, fault, repair time, cost
CalibrationDates and certificate numbers

NABH standards and inspectors look for equipment maintenance records. See IT and equipment asset register.

Power protection

Many breakdowns come from voltage fluctuations. Use stabilisers or online UPS units for sensitive equipment, and proper earthing.

Buying with service in mind

When buying equipment, ask about local service engineers, spare parts availability, response times and AMC costs after warranty. A cheaper machine with poor service can cost more in downtime. Buy devices that meet Indian medical device rules. See buying registered medical devices.

When to replace

Replace equipment when repairs become frequent, parts are no longer available, the manufacturer ends support, or new standards make it unsafe. Plan replacements in your yearly budget.

Negotiating contracts

Get quotes from the manufacturer or authorised dealer and, where suitable, a reputable third party. Ask for references from other clinics. Negotiate response times, standby units and the number of preventive visits, not only price. For groups with several branches, ask for one contract covering all sites. Read exclusions carefully: probes, tubes, batteries and damage from power surges are often excluded, and these can be costly.

Managing the service visit

When an engineer visits, ask what was checked, what was replaced and whether anything needs attention soon. Get a signed service report and file it in the device log. If a fault repeats, escalate to the service manager and ask for a root cause, not just another repair.

Budgeting for maintenance

As a rough plan, set aside a yearly amount for maintenance contracts, calibration and repairs, and a separate fund for replacing major equipment over its expected life. Review the figures each year against actual spending. Equipment that costs more each year to keep running than its value is a candidate for replacement.

Keep the contract, the service provider's contacts and the device logs together where reception can find them quickly during a breakdown.

A worked example

A dental clinic in Coimbatore had two chairs, an X-ray unit and an autoclave, all past warranty. Breakdowns were fixed by whoever was available, often after days. The clinic signed a CMC with the authorised dealer for the chairs and X-ray, with a 24-hour response and quarterly preventive visits, and an AMC for the autoclave. It added stabilisers, a daily checklist for staff and a log for each device. Downtime fell from about ten days a year to two.

Common mistakes

  • No contract after warranty ends.
  • Contracts without response times or standby units.
  • Ignoring calibration.
  • No maintenance records.
  • Buying equipment without checking local service.

Where Bractis fits

Bractis is clinic software for records, prescriptions and billing. For equipment maintenance tracking, many clinics use a simple register or spreadsheet; ask the team what is supported today if you want it in one place.

Frequently asked questions

What is the difference between AMC and CMC?

AMC covers labour and preventive visits; CMC also covers most parts.

How often should clinic equipment be serviced?

As the manufacturer recommends, often two to four preventive visits a year for major equipment.

Do clinics need calibration certificates?

Measuring devices should be calibrated as recommended, and certificates kept for records and inspections.

Is third-party servicing safe?

It can be, but authorised service usually offers genuine parts and trained engineers. Check carefully.

Run this in your own clinic

Bractis is clinic management software built for Indian OPDs: appointments, patient records, prescriptions, billing and follow-up in one place. You can try it in your own clinic before you decide.

Sources and review

Written by the Bractis editorial team for doctors and clinic owners in India. Rules, fees and prices change: check the linked primary sources before acting, and ask your CA or lawyer about your own case.