Skip to main content

Spirometry in the OPD: Preserve Quality, Context and Interpretation

A useful spirometry record preserves the original report, test quality, measurement units, pre- or post-bronchodilator status and the clinical question. The clinician then interprets the findings alongside symptoms, exposure and previous evidence. A low value, an automated interpretation or a single FEV1/FVC ratio should not silently become a confirmed asthma, COPD or TB diagnosis.

By Bractis · Updated · 9 min read

Pulmonologists, general physicians and Indian OPDs that order spirometry, receive outside reports or follow people with persistent respiratory symptoms.

Start with the respiratory question the test is meant to answer

A referral reading only 'PFT' gives the receiving team little context. Record why testing is being considered: the symptom pattern, its duration, previous respiratory diagnoses and the uncertainty the doctor wants to resolve. Preserve the patient's description of exertion and activity alongside clinical terminology. 'Breathless on the stairs to the second floor' is more useful for later comparison than an unexplained severity label.

Keep the chronology of cough, wheeze, breathlessness, recent illness and treatment changes. Distinguish a diagnosis documented by another clinician from a condition the patient recalls or a possibility under assessment. If a past TB episode is relevant, retain its source and treatment history; do not infer current infection or its absence from spirometry.

The clinician and testing service determine whether, when and under what precautions testing is appropriate. Reception should communicate the referral question and relevant instructions, rather than issue an automatic medicine-withholding message to every patient. Any preparation advice must identify the responsible service and the exact medicine or device concerned.

Keep technical quality visible beside the result

The ATS/ERS technical statement treats acceptable manoeuvres, repeatability and test reporting as essential measurement issues. For an OPD receiving a report, the practical implication is to retain the testing service's quality assessment and limitations, not just its largest numbers or interpretation sentence.

A report may describe incomplete effort, cough, an early end to the manoeuvre or other difficulty. Preserve what the operator actually reported. Do not retrospectively award a quality grade from a PDF summary that lacks the necessary curves or manoeuvre data. A missing quality field means the information is missing; it does not mean the session passed.

Identify the laboratory, test date, operator or report author when available, and the source document. Record relevant height, age and other inputs exactly as used by the testing service, with a correction route for errors. If an amended report arrives, keep its relationship to the first version and notify the clinician who interpreted the original.

The doctor may decide that limited data still contribute to the assessment, that clarification is needed, or that another assessment is appropriate. Record that decision and its reason. Avoid a software rule that either accepts every uploaded test or discards every technically limited test without clinical review.

Source: ATS/ERS: Standardization of Spirometry 2019 Update

Separate measured values, reference values and testing conditions

FEV1, FVC, their ratio and percentage-of-predicted fields answer different numerical questions. In a fictional report, FEV1 of 1.80 L divided by FVC of 2.40 L gives a ratio of 0.75, or 75%. That arithmetic does not mean FEV1 is 75% of its predicted value. The latter calculation requires its own reference value.

Keep pre- and post-bronchodilator observations attached to the correct condition and time. Preserve the medicine and administration details supplied by the testing service, the response calculation it used and its stated interpretation. Do not subtract a pre-test value from one visit from a post-test value months later and call the difference a bronchodilator response.

Reference equations, units and report conventions can differ. When a number is transcribed into a flowsheet, retain its original label. If the clinician cannot reconcile two reports, record the unresolved difference rather than forcing both into a shared column. A clean-looking graph can otherwise conceal a change in what was measured.

These examples explain record structure, not diagnostic cut-offs. Interpretation belongs to a clinician using the complete assessment and an appropriate current clinical reference.

On a narrow screen, scroll the table horizontally to read all columns.

Fields that should remain distinct when importing a spirometry report
Report elementRetainAvoid
FEV1 and FVCMeasured value and unit, each in its own fieldPasting a percentage into a volume field
FEV1/FVCRatio convention, such as 0.75 or 75%Treating it as FEV1 percentage predicted
Reference comparisonReference value or equation information when providedAssuming two laboratories used identical references
Before and after bronchodilatorCondition, time and supplied administration detailsMixing different visits into one response calculation
Quality and interpretationOperator limitations and clinician assessment separatelyReplacing both with an automatic diagnosis label

Source: ATS/ERS: Standardization of Spirometry 2019 Update

Build an exposure history that survives changes in smoking pattern

Ask about the actual product and periods of use. A patient may have changed cigarette quantity, stopped and restarted, used bidis, or had significant cooking-fuel or occupational exposure. Record each history in its own terms, including uncertainty. 'Smoker: yes' loses the information needed for a useful follow-up conversation.

The National Cancer Institute defines pack-years as packs per day multiplied by years. For this fictional arithmetic example, one pack is explicitly defined as 20 cigarettes. Ten cigarettes daily for 15 years gives 0.5 × 15 = 7.5 pack-years; twenty daily for a further five years gives 1 × 5 = 5. The combined estimate is 12.5 pack-years.

That calculation assumes the stated average applied throughout each period. If use varied substantially, retain the patient's range or estimate and the assumption used. Do not invent precision by assigning an exact start date to 'around college time'. A later correction should update the estimate while preserving why it changed.

Describe bidi use, biomass smoke, workplace dust and other exposures separately. This example supplies no validated conversion of those exposures into cigarette pack-years. Ask what changed after counselling or workplace intervention so the next visit can review an actual action, not merely repeat the same exposure label.

Source: National Cancer Institute: Pack year

Write the interpretation as a reasoned clinical conclusion

The respiratory note should make it possible to see which evidence supported the clinician's conclusion and what remains unresolved. Separate 'outside report describes obstruction', 'doctor reviewed the report' and 'diagnosis entered after assessment'. These are different events and may occur on different dates.

Record the symptom trajectory, current medicines as actually used and relevant prior tests alongside the new report. Device teaching belongs in a linked inhaler record. Repeating a generic inhaler paragraph inside every spirometry note makes it harder to find the interpretation and any outstanding question.

If further testing or specialist review is planned, state its purpose, the person responsible for arranging it and the intended review point. If the patient cannot obtain the test locally, record the agreed alternative route. A recommendation without a feasible next step does not resolve the original uncertainty.

Urgent symptoms must enter the clinic's clinical assessment pathway immediately. A scheduled lung-function test, a reassuring historical result or a pending report is not a reason to defer assessment of a person who is unwell now.

Use a short report-reconciliation note

The note below is designed for an Indian clinic receiving a report from an outside diagnostic centre. It preserves provenance and unanswered questions without requiring staff to recreate the full laboratory report.

During a software demonstration, use two fictional reports with different units or missing quality information. Check whether the doctor can inspect the original, explain the difference and leave a clearly assigned clarification task. The important outcome is an interpretable longitudinal record, not a longer list of imported numbers.

An imported percentage in the wrong column

A fictional clinic receives a report containing FEV1 1.80 L, FVC 2.40 L and FEV1/FVC 75%. The import places '75' in an FEV1 percentage-predicted field. During review, the doctor compares the source PDF with the flowsheet, corrects the field mapping and records that percentage-predicted FEV1 was not supplied in the extracted data. No diagnosis is generated from the corrected ratio alone. The useful improvement is traceability from each displayed value back to its original meaning.

Respiratory evidence reconciliation

Use these prompts in your clinic’s own notes. Record the result, responsible person and next action for each item.

Clinical question
What uncertainty should the test help resolve, and where are the symptom chronology and previous diagnoses sourced?
Report integrity
Can the clinician see the original quality statement, units, pre/post condition and report version?
Exposure calculation
Are periods and products separated, with assumptions visible and no unsupported bidi or biomass conversion?
Next decision
Who will interpret missing or conflicting evidence, communicate the conclusion and review the next step?

Questions doctors ask

Can one FEV1/FVC value establish a diagnosis?

It should not become a diagnosis automatically. The clinician needs the test's quality and conditions, the appropriate interpretive reference and the person's clinical context. This guide supplies no diagnostic cut-off.

Is an FEV1/FVC ratio of 75% the same as FEV1 at 75% predicted?

No. The ratio compares two measured volumes. Percentage-predicted FEV1 compares measured FEV1 with a reference value. Keep the labels and calculations separate.

What if an outside spirometry report has no quality grade?

Keep the original report and identify the missing information. The clinician can seek clarification and decide how the available evidence should be used; staff should not invent a grade or mark the test as accepted by default.

How should a changing cigarette history be recorded?

Divide it into periods with a stated average and duration, then show the calculation assumptions. Retain uncertainty and describe other tobacco or environmental exposures separately.

Should the clinic send the same inhaler-withholding instruction to everyone?

No blanket instruction should be generated from a test booking. Use the specific preparation advice authorised by the referring or testing clinician and provide a route for patients whose medicines or circumstances differ.

Sources and scope

Updated on . This is a documentation and review guide, not a spirometry operating manual or a diagnostic rule for asthma, COPD or TB. Numerical examples illustrate arithmetic and field meaning only. No independent clinical or legal review is claimed.

  • ATS/ERS: Standardization of Spirometry 2019 Update

    Official ATS/ERS technical statement, 2019. Relevant primary indexed text checked 25 October 2026; direct PMC access returned a browser check. Used for measurement quality and pre/post test distinctions, not a treatment threshold.

  • National Cancer Institute: Pack year

    US National Cancer Institute definition, accessed 25 October 2026. Supports packs-per-day multiplied by years. The worked example explicitly states its 20-cigarette pack assumption and is not a bidi or biomass conversion.

Try the workflow
with Bractis.

Use two fictional spirometry reports to examine source-document access, measurement labels, quality notes and the handover from test receipt to clinical interpretation.

Request a clinic demo